Ian Knot

Ian Knot diagram

My own Ian Knot (yes – I'm the inventor) is the World's Fastest Shoelace Knot. Make a loop with both ends and simultaneously pull them through each other to form an almost instant knot.

Quick Preview:

Ian Knot GIF animation

Before we begin, here's a small GIF animation of my Ian Knot to prove that it really is the world's fastest.

Regular Instructions

The following are the regular instructions and diagrams for my Ian Knot. See also my detailed instructions and finger illustrations starting from Step 8 (below).

Step 1:

Begin with regular “Starting Knot”

Begin with a regular Left-over-Right Starting Knot.

(See also illustration at Step 8)

Step 2:

Fold both lace ends into “loops”

Make both ends into “loops” by simply doubling them back onto themselves.

(See also illustration at Step 9)

Step 3:

Twist both loops anti-clockwise

Twist both loops anti-clockwise so that the left (yellow) loose end is at the front and the right (blue) loose end is at the back.

(See also illustration at Step 10)

Step 4:

Cross loops, left (yellow) in front

Cross the loops with the left (yellow) loose end in front.

NOTE: The loops are really more “alongside” each other, which is difficult to illustrate.

(See also illustration at Step 11)

Step 5:

Feed loops through each other

Each hand uses the two fingers inside its own loop to grab the loose end of the other hand's loop.

(See also illustration at Step 12)

Step 6:

Loops emerge from both sides

Each hand releases its own loop and pulls the loose end of the opposite loop through its own.

(See also illustration at Step 13)

Step 7:

Pull tight to complete the knot

Pull both loops tight to complete the knot.

(See also illustration at Step 14)

Detailed Instructions

The following are detailed instructions and finger illustrations for my Ian Knot. See also my regular instructions and diagrams starting from Step 1 (above).

Step 8:

Begin with regular “Starting Knot”

Begin with a regular Left-over-Right Starting Knot.

(See also diagram at Step 1)

Step 9:

Fold both lace ends into “loops”

Hold the left (yellow) lace around the left thumb and forefinger, using the other fingers of the left hand to hold the lace taut. Hold the right (blue) lace between the right thumb and forefinger.

(See also diagram at Step 2)

Step 10:

Twist both loops anti-clockwise

The left hand simply rotates forwards so that the left (yellow) loose end is at the front. The right middle finger pushes the right (blue) loose end to the back.

(See also diagram at Step 3)

Step 11:

Cross loops, left (yellow) in front

The left thumb pushes the left (yellow) loose end over to the right, while the right middle finger continues to push the right (blue) loose end all the way between the left thumb and forefinger to end up inside the left loop.

(See also diagram at Step 4)

Step 12:

Feed loops through each other

The left thumb and forefinger grab the right (blue) loose end, while the right thumb and middle finger grab the left (yellow) loose end.

(See also diagram at Step 5)

Step 13:

Loops emerge from both sides

Each hand releases its own loop and pulls the loose end of the opposite loop through its own. Take care not to pull the ends all the way through, as this will form a “knot” instead of a “bow”. In fact, this is a quick way to tie a “Starting Knot” (although the finger movements must be reversed left/right to balance the finished knot).

(See also diagram at Step 6)

Step 14:

Pull tight to complete the knot

Pull both loops tight to complete the knot. With practice, I can now tie my shoelaces in about one third of the time of a conventional knot!

(See also diagram at Step 7)

NOTE: You don't have to follow my instructions to the letter. So long as you retain the “core” of the technique, you are welcome to use whatever finger movements are most comfortable for you.

NOTE: If your finished knot comes out crooked, it's probably because you tie your Starting Knot the opposite way to mine. This will result in an un-balanced “Granny Knot”, which sits crooked and comes undone more easily. See my Granny Knot page for more information.

Rate This Shoelace Knot


• Select rating, then click button to submit.

• Or, view results without rating this method.

Please only vote once – multiple votes are removed daily

Support Ian

Sponsors

Click to buy U-Lace elastic shoelace segments (USA)
Click to buy tough shoelaces from Ironlace (USA)
Click to buy shoelaces from Big Laces (UK)
Click to buy handmade shoelaces from Cute Laces (USA)

This page last updated: 01-Oct-2021. Copyright © 2000-2021 by Ian W. Fieggen. All rights reserved.

Website created by Ian Fieggen (aka. “Professor Shoelace”), inventor of the Ian Knot.

Ian's Other Websites:
Ian's Shoelace SiteShoelaceIan's Software SiteSoftwareIan's Graphics SiteGraphicsIan Fieggen's SiteIanFieggen Family TreeTree